Specifications

Clearing all memos +
1. Press the clear key ( + ). You will see CLEAR
(CONVERSATION) on the display.
2. Press the to change the setting to MEMOS.
3. Press the key. You will see CLEAR MEMOS Y/N on the
display.
4. Press the key to clear all memos. Press the key if you
decide not to clear all memos.
Saving a conversation as a memo +
You can save your conversation as a memo at any time during or
after a call, but you must do it before you turn off your Supercom
4400. The conversation is recorded from the beginning until you
hang up or tell the Supercom 4400 to stop. The memo stays in
memory until you clear it. The memo can be edited in the same way
as any other memo. Follow these steps to record a conversation:
1. Press the save conversation key ( + ).
2. Type a new memo name and press the key. The display
returns to the conversation. You are now recording.
3. To stop recording at any time, press the key. The display
returns to the conversation.
Your conversation is now saved in memo memory and you will see
the name of the memo in the list of memos. You will still be able to
read the conversation in the memo memory even if you clear
conversation memory.
Note that if memo memory does not have room for the whole
conversation, it saves as much of the most recent part as it can and
stops recording.
Esc
Return
7Ctrl
7Ctrl
NY
Return
Spacebar
8Ctrl
8Ctrl
56 • MEMOS