Specifications

Turning off the auto-answer relay
voice announcer +
When the Supercom 4400 answers the telephone, it sends out the
relay voice announcer message, “Please use text telephone or dial
relay,” before it sends your auto-answer memo. If you do not want
the Supercom 4400 to send this message, follow these steps to turn
it off:
1. Press the options key ( + ).
2. Press the key until you see AUTO ANSW VOICE
(ON) on the display.
3. Press the to change the setting to OFF.
4. Press the key to leave options.
Clearing auto-answer messages +
Most of the time you will clear messages after you read them, but
you can also clear them by following these steps:
1. Press the clear key ( + ).
2. Press the until you see CLEAR (AA MESSAGES) on
the display.
3. Press the key. You will see CLEAR MESSAGES Y/N.
4. Press the key. The display says MESSAGES CLEARED.
Press the key if you decide not to clear your messages.
N
Y
Return
Spacebar
8Ctrl
8Ctrl
Esc
Spacebar
Return
9Ctrl
9Ctrl
AUTO-ANSWER • 47