Specifications

Relay dialing with E-Turbo
+
You can benefit from E-Turbo if your state or national
Telecommunications Relay Service (TRS) provider offers E-Turbo
technology. Please refer to page 33, Relay dialing, if E-Turbo is not
available in your area.
Placing a call using relay dial with E-Turbo on
+
1. Make sure the Supercom 4400 is on and directly connected to
your phone line. The Power light should be lit.
2. Press the relay key (hold key and press the key).
DIALING THRU RELAY is briefly displayed. TYPE DIAL
THRU NUM is displayed.
3. Type the number of the person you wish to call and press
.
4. CHECKING DIAL TONE is briefly displayed. DIALING is
displayed followed by the number of the TRS that you have
programmed for this key.
The call is automatically placed through the TRS. You may see
some messages such as the CAs greeting or the status of your
call being dialed.
5. When the person you are calling answers the phone, continue
your conversation as you would with any relay call.
Return
2Ctrl
2Ctrl
2Ctrl
ADVANCED CALLING • 37