Specifications

Relay dialing

Relay dialing lets you quickly dial your Telecommunications Relay

Service (TRS) with the relay key ( + ). You can program your

Superprint 4425 with the telephone number of your relay service

(see Saving relay information on page 31).

Placing a call using relay dial +

1. Make sure the Supercom 4400 is on and directly connected to

your phone line. The Power light should be lit.

2. Press the relay key (hold key and press the key).

CHECKING DIAL TONE is briefly displayed. DIALING is

displayed followed by the number of the TRS that you have

programmed for this key. (The preprogrammed relay number

is 711.)

3. When the relay service starts ringing, the Supercom 4400

signal light flashes slowly and LINE IS RINGING is

displayed.

4. When the Communications Assistant (CA) answers the call,

his or her greeting is displayed on your TTY. Type instructions

for the CA such as the number and the name of the person you

wish to call. The CA will dial the number of the person you

are calling and type information such as whether the phone is

ringing or busy.

5. When the person answers the phone, the CA will introduce

the call and begin typing everything that the other person

says.

6. When the other person says GA, begin typing what you want

to say. The CA will read what you type to the person you are

calling.

7. Continue your conversation.

2Ctrl

ADVANCED CALLING • 33