Specifications

Turbo Code interrupt +

Using Turbo Code interrupt

You can interrupt the other person when he or she is typing by

following these steps:

1. Be sure you see the Turbo Code dot in the lower left corner of

your display.

2. Press the interrupt key ( + ) while the other person

is typing.You will see INTERRUPT REQUESTED on the

display.

3. The other person will see “Interrupt” on the display. He or she

can choose to stop typing and let you go ahead or ignore your

interruption and continue.

If you see INTERRUPT on your display while the ring flasher

flashes, it means that the other person wants to interrupt you and

start typing. You can choose to stop and let the other person go

ahead or continue typing yourself. You may also see INTERRUPT

on your display without being connected in Turbo Code if the other

person taps the spacebar a few times.

Turning off Turbo Code interrupt +

You can turn off interrupt so that the other person cannot send an

interrupt to you. Turning off interrupt does not affect outgoing

interrupts. You can still send an interrupt to the other person.

Follow these steps to turn off interrupt:

1. Press the options key (hold down the key and press the

key). You will see PRINT (UP/LOW) CASE on the display.

2. Press the key until you see INTERRUPT (ON) on the

display.

3. Press the to change the setting to OFF.

4. Press the key to save the new setting and leave options.

Esc

Spacebar

Return

9Ctrl

Ctrl

24 • CALLING