Specifications

Signal light and display

The signal light (and display in direct connect) show what is

happening on the telephone line in the following ways:

Signal light Display Telephone line

Steadily on Dial tone

Flashing slowly RINGING Telephone ringing

Flashing quickly BUSY Telephone busy

Flickering Person picking up

telephone or speaking

Dialing tips

You may need to type a 9 or other number to reach an outside line if

you are using the Supercom 4400 in an office. The exact method of

dialing will depend on your local telephone system. Dialing a TTY

call should be the same as dialing a voice call.

Use a comma to put in a one-second pause. For example:

9,222 5555.

For long distance, include a 1 and the area code.

Use a ! for a hook flash. A hook flash is used in a voice mail system

or to transfer a call.

You cannot use * and # with pulse dialing.

Redialing the same number +

Follow these steps to redial the last number you dialed:

1. Press the dial key (hold down the key and press the

key). You will see TYPE NAME, NUM, OR CR on the

display.

2. Press the key.

Return

Ctrl

CALLING • 19