Specifications

Statement of Intended Use
This modem is for connection to the British public
switched telephone network.
The Minicom 6000 Plus has been tested for use of
the following facilities:
• Timed break recall
• On-hook dialling
• Incoming call indicator
• Operation in absence of secondary
proceed indicator
• Recorded speech announcement
• Detection of initial proceed indication (dial
tone)
• Automatic storage of last number dialled
• Tone detection, i.e., ring tone, busy
• Modem
• Automatic answer—data only
• Multi-frequency and loop disconnect dialling
You may connect to:
• Direct exchange lines providing Loop
Disconnect (LD) or Multi-Frequency (MF)
signalling and timed break recall facilities.
• Extension with new plug and socket
arrangement provided with these direct
exchange lines.
• Compatible switchboards, including those which
do not provide secondary proceed indication. If
you use the Minicom 6000 Plus with a
compatible switchboard it cannot be guaranteed
that the Minicom 6000 Plus will operate
correctly under all possible conditions of
connection. If you have difficulty, contact your
sales representative for further information.
• If your switchboard is privately owned, your
Minicom 6000 Plus can be connected to it by an
authorized maintainer.
You may not connect:
• To shared service (party) lines
• To 1 + 1 carrier systems
• As an extension to a payphone
The Minicom 6000 Plus is suitable for connection to
PBX equipment that returns secondary proceed
indication.
The Minicom 6000 Plus is only approved for
compatible PBXs. Please contact your Minicom
6000 Plus supplier for a list of PBXs which are
compatible. Because of differences in the private
telephone systems there is no guarantee that the
Minicom 6000 Plus will work correctly in all
circumstances. If you experience any difficulties or
have questions, please contact your supplier.
78 • SPECIFICATIONS