Specifications

4. Press . PASSWORD: / is displayed.

5. Type a password using up to 8 characters (you cannot use @ # % & or *

symbols). The ‘/’ character is part of your password.

6. Press .

7. Press to exit the Options menu.

Changing Your Password

You can change your password at any time by repeating the steps above.

Reading Messages While You are Away

1. Call your Minicom 6000 Plus. The Minicom 6000 Plus must have Auto-

Answer turned on when you call.

2. Wait for the answer message to end. Then, press .

3. Type ‘/’ and your password, like this: ‘/PASSWORD’

4. Press again. Your Minicom 6000 Plus sends the number of messages

you have and amount of memory space remaining. After a pause, it begins

sending the messages. At the end,

(END OF MESSAGES) is displayed.

5. When

CLEAR MESSAGES Y/N is displayed, press to clear them. Your

Minicom 6000 Plus sends

MESSAGES CLEARED and hangs up.

If you decide not to clear your messages, press .

REPLAY MESSAGES

Y/N? is displayed. Press to replay messages. If you decide not to replay

messages, the Minicom 6000 Plus sends

PLEASE HANG UP and hangs up.

Return

Esc

Return

44 • AUTO-ANSWER