Specifications

Clearing Conversations + /CLEAR

If for some reason you do not want to leave a conversation in memory, you can

clear the conversation memory yourself. This erases all conversations but does

not clear Memos, Directory entries or Auto-Answer messages.

To clear conversations:

1. Press the Clear key ( + /

CLEAR

). CLEAR CONVERSATION is

displayed.

2. Press .

CLR CONVERSATION Y/N is displayed.

3. Press to clear the conversation. (Press if you decide not to clear

conversations.)

Saving a Conversation as a Memo

SAVE CONVERSATION

You can save your conversation as a Memo at any time during or after a call, but

you must do it before you turn off your Minicom 6000 Plus. The conversation is

recorded from the beginning of the conversation. Memos are stored in memory

until you clear them. For more information on Memos, see Chapter 8.

To save a conversation as a Memo:

1. Press the Save Conversation key ( + /

SAVE CONVERSATION

2. Type a new Memo name and press . The display returns to the

conversation. You are now recording.

3. To stop recording at any time, press . The display returns to the

conversation.

Your conversation is now saved as a Memo and you will see it in the list of

Memos. Even if you clear conversation memory, you will still be able to read the

Memo you created.

NOTE: If Memo memory does not have room for the whole conversation, it saves

as much of the most recent part as it can and stops recording.

Esc

Return

7Ctrl

Return

8Ctrl

26 • ADVANCED CALLING