Specifications

Some character s ar e not being sent.
Because Baudot code does not support special characters, it does not
recognize some of the “shift” characters on the top row of a TTY
keyboard (example: @ # $ % ^ & *_<>). To type these
characters (such as in an email address) make sure your call is
connected in Turbo Code (see About Turbo Code
®
on page 16).
T he displa y is b lank and the EZcom Pr o has po w er (ba tteries
installed and A C ada pter is plug g ed in).
The EZcom Pro automatically turns off to save battery power. Press
the or key to turn on the TTY.
Also, even though the display screen is blank, you will not miss
calls. The EZcom Pro automatically turns on when it detects an
incoming call.
Resetting the EZcom Pro
Resetting the EZcom Pro erases the memory and returns all settings
to their defaults. To reset the EZcom Pro, do the following:
IMPORTANT! Resetting the EZcom Pro erases the entire EZcom Pro
conversation memory, telephone directory, Relay number, and resets
the greeting message. Erased items can not be retrieved.
1. Press the key to turn on the EZcom Pro.
2. Hold down both keys and then press the key.
The EZcom Pro asks you if you are sure that you want to reset
the memory.
3. Press the key to reset the EZcom Pro. You will see RESET on
the display screen.
Or, press the key if you decide not to reset the EZcom Pro.
N
Y
Shift
On/Off
Dial
On/Off
TROUBLESHOOTING • 53