Specifications

About Auto ID
™
(Sending ID)
Auto ID alerts a hearing person that you are using a TTY by
sending several audible tones over the telephone line every few
seconds. Auto ID automatically turns on after you dial a number
and stays on until you start a TTY conversation. Auto ID helps
emergency services, such as 911, detect that you are using a TTY.
You will see SENDING ID on the display every time the EZcom Pro
uses Auto ID.
Auto ID is not the same as Caller ID (a service offered by your
telephone company).
The EZcom Pro comes with Auto ID set to work automatically.
However, you may turn off Auto ID by following these steps.
IMPORTANT! When it is off, Auto ID will not send tones
automatically. Emergency services will not hear the Auto ID tones
that help detect that you are using a TTY.
1. Press the key to turn on the EZcom Pro.
2. Press the key and then press the key to scroll to
Options.
3. Press the key to select Options.
4. Press the key to scroll to Auto-ID and press the key
to select Auto-ID.
5. Press the key to move the brackets to Off and press the
key to select Off.
You will see AUTO-ID OFF appear on the display screen.
6. Press the key when you are finished.
Note: Repeat these steps to turn on Auto ID by moving the
brackets to On in step 5 and pressing the key. You will see
AUTO-ID ON appear on the display screen.
Esc
Menu
On/Off
GETTING STARTED • 19