Specifications

About the key

When using the menu procedures to change EZcom Pro directory

information or feature settings, the key, when pressed, will end

the procedure and return the TTY to the ready screen or the

conversation screen.

If you press the key before completing a menu procedure, any

newly typed information or changed feature setting will not be

saved. However, any older information or feature setting will

remain in the EZcom Pro memory. If you want to ensure that your

changes are saved, press the key at the end of a procedure.

Using Tone or Pulse dialing

The EZcom Pro is set to use tone dialing. If your telephone line uses

pulse dialing, follow these steps to change the setting to pulse:

1. Press the key to turn on the EZcom Pro.

2. Press the key and then press the key to scroll to

Options.

3. Press the key to select Options.

4. Press the key to scroll to Dial and press the key to

select Dial.

5. Press the key to move the brackets to Pulse and press the

key to select Pulse.

You will see PULSE DIAL ON appear on the display screen.

6. Press the key when you are finished.

Note: Repeat these steps to change the dialing setting to tone by

moving the brackets to Tone in step 5 and pressing the key.

You will see TONE DIAL ON appear on the display screen.

About Turbo Code

Turbo Code is an enhanced version of Baudot code. It sends and

receives signals with other Turbo Code TTYs as fast as you type and

allows you to interrupt the other person during a conversation. The

EZcom Pro automatically connects in Turbo Code or Baudot code,

depending on which code the other TTY is using. The EZcom Pro

Esc

On/Off

Esc

16 • GETTING STARTED