Specifications

9
POWER &
BATTERIES
KEYBOARD &
DISPLAY
TIME/DATE
TELEPHONE/
WIRELESS
CALLS
MEMOS
CONVERSATIONS MEMORY DIRECTORY CODES
CARE &
REPAIR
Turn on the Compact/C and put the telephone handset in the
acoustic cups. Make sure the cord is on the left side. If you are
answering, type a greeting. If you are calling, dial the number on
the telephone and wait for a response, then start typing.
If you are calling a person who will answer by voice, turn on the
TTY Announcer (see Using the TTY Announcer on page 10 for more
information). If you are a new TTY user, see TTY Etiquette on the
back cover. For information about using a cellular or cordless phone,
refer to Wireless Telephone Calls on page 12.
Be sure the telephone handset makes good contact with the acoustic
cups. The right side, the receiving end, is especially important. You
can slide the right cup back and forth slightly to improve the fit.
Placing a Call
1. Turn on the Compact/C. You will see the Conversation screen
on the display:
TELEPHONE CALLS
OFF
O
N
COMPACT/C by ULTRATEC
07/01/02 7:15:01 PM
2. Put the telephone handset in the acoustic cups with the cord
on the left.
3. The Signal light comes on steadily when you have a dial
tone.
If you don’t see the Signal light, hold down the telephone
hook for two to three seconds or adjust the telephone
handset.
====== 07/01/02 07:15:26 PM ======
01 JUDY HERE GA_ _ _ _ _ _ _ _ _ _ _ _ _
6. Type your reply. When the bottom line fills up, it moves up
to make way for line 02.
7. Turn off the Compact/C and hang up the telephone when
you are finished.
To make a call, put the telephone handset in the acoustic
cups, press the On/Off key, dial the number on the
telephone, and type.
4. Dial the number. The Signal light flickers as you dial, then
flashes slowly when the other telephone rings. It flashes
quickly if the line is busy.
5. The Signal light stops flashing when someone answers. You
will see the other person’s greeting on the screen. “01” is the
line number.
305-005602 6/17/02 11:01 AM Page 20