Installation Guide

- 11 -

Installing the Handles

1. Place the handles onto the handle posts, the handle should point away from the door's

edge.

2. With the handles placed on its position, insert the screwdriver into the hole of the handle,

to secure them, turn the screwdriver counterclockwise. Then turn the handle down, the

movement of the latch should be smooth, if the operation is not smooth, review the

previous steps to ensure proper installation.

If the handles are installed in the wrong direction, you need to remove and re-install them. To

remove them, insert the screwdriver into the hole in the handle, rotate it clockwise until you

can pull the handle out, then follow the instructions and re-install them in the right direction.

STEP

Side B