Instructions / Assembly

ENGLISH
- 18 -
4.4 Delete Admin and User
Please reset the lock to Factory Default Mode to delete Admin
and all Users.
How to reset the lock in Standalone Mode?
Please use a Reset Needle to push the Reset Button (at the
bottom of Interior Assembly) for around 3 seconds until you
hear one long beep and two short beeps.
FAQ
1. How to reset U-Bolt Pro WiFi?
Please note all data will be erased if you reset U-Bolt Pro WiFi to
factory default.
If you are using U-tec App as Owner, please click “Delete and
Reset” to remove the lock from your U-tec Account, then use a
Reset Needle to push the Reset Button (at the bottom of Interior
Assembly) for around 3 seconds until you hear one long beep and
two short beeps.
If U-Bolt Pro WiFi is working as Standalone Mode, please use a
Reset Needle to push the Reset Button (at the bottom of Interior
Assembly) for around 3 seconds until you hear one long beep and
two short beeps.
2. What if I lost the paired smartphone?
Please go to www.u-tec.com/myutec.html or login U-tec App via
another smartphone to change your U-tec Account password.
3. How can I unlock U-Bolt Pro WiFi if the battery runs
out?
There will be low battery alert on the lock and App when battery
is low. Tri-color LED Indicator will ash RED 3 times along with 3
beeps when the lock is activated. Please replace batteries.
Solution 1. Use the backup key to unlock.
Solution 2. Connect a 5V power bank to activate the lock
temporarily.