Operation Manual

Fold & Go Model 370 Owner’s Manual
EMC Part: 19269600 • Rev. 03 • 04/11/05
38
Brake release lever
sticks 1. Rust and corrosion 1. Spray ball detent area with lubrication
oil. Be careful not to get oil onto the
brake pad
Stiffness in steering 1. Possible grime build up 1. Lubricate bearings
2. Bearings in head tube worn 2. Replace bearings
Controller Fault Codes
In addition to the troubleshooting information in the previous section, the controller used in the Model 370 Fold & Go
provides diagnostic information through means of a Fault Code Display that appears on the Battery Gauge. When a fault
is detected, selected segments of the Battery Gauge will light to indicate the faults. Codes and faults are listed in the
following.
Battery Gauge LED Segment Lit Meaning and What To Do
1 Battery needs recharging or bad connection with battery. Check connections,
recharge battery.
2 Bad motor connection. Check all connections between controller and motor.
3 Short circuit between motor and battery connection. Contact authorized service
facility.
4 & 5 (not used)