Operation Manual

Fold & Go Model 370 Owner’s Manual

EMC Part: 19269600 • Rev. 03 • 04/11/05

Re-assembling the Fold & Go Model 370

Putting the Model 370 back together involves re-attaching the drivetrain, installing the seat, raising & locking the seat

frame, and re-positioning the tiller and dash for driving operation. Instructions to re-assemble the Model 370 are

provided in this section.

1. Place drivetrain on firm, level surface with drivetrain rear

anti-tip casters facing the rear of the scooter.

2. Position rear of frame over top of drivetrain so that slots

in the rear of the frame align with struts of the drivetrain.

Slide frame onto drivetrain. Install drivetrain knobs and

tighten fully. Plug drivetrain into connection on frame.