Operation Manual

Fold & Go Model 370 Owner’s Manual

EMC Part: 19269600 • Rev. 03 • 04/11/05

Taking the Fold & Go Model 370 Apart

Taking the Model 370 apart involves removing the seat and

Battery Pack, lowering the tiller assembly, and removing the

drivetrain. Instructions to disassemble the Model 370 appear in

the following.

1. Turn power “OFF.” Fold seat back down.

2. Pull seat latch bar on rear underside of seat frame. Lift rear

of seat and slide seat to disengage from the frame (see Figure

12).

Figure 12 — Seat Removal

3. Lift Battery Pack by handle and pull up to remove

Battery Pack, as shown in Figure 13.

Figure 13 — Battery Pack Removal