Operation Manual

Fold & Go Model 370 Owner’s Manual
EMC Part: 19269600 • Rev. 03 • 04/11/05
23
7. Using the Tiller Adjustment Lever, release the tiller and fold the tiller down. Secure tiller with provided velcro straps.
With the vehicle in this folded position, you can easily lift the front end by the frame handle and roll it on the anti-tip
casters.
Warning!
Do not place metal objects over open battery terminals. May cause short circuits.
You can remove the seat either folded or unfolded. To remove the seat in its folded, flat position, release the seat latch
handle at the left rear of the frame and lift the seat away. Be sure to hold the seat frame while you lift the seat.
To remove the seat in its unfolded, upright position, release the seat latch handle and pivot the rear of the seat upward,
then slide the front legs rearward out of the leg sockets. The latched unfolded seat may be used as a portable, lightweight
seat when it is not attached. If you sit in the seat when it is detached, be sure to place it on a firm, level surface.