Operation Manual

Fold & Go Model 370 Owner’s Manual
EMC Part: 19269600 • Rev. 03 • 04/11/05
22
Folding and Unfolding Operations
The ability to easily and safely fold and stow the vehicle and later unfold and use it is a prime feature of the Fold & Go
vehicle. Instructions to fold and unfold are presented in the following. No tools are required to either fold or unfold the
vehicle and it can safely be performed by one person.
Folding Instructions
1. Turn key switch to “Off” position.
2. Remove battery pack by simply pulling upright on the battery pack handle, the lock latch will automatically disengage.
Using the handle, carefully lift the battery pack up and away from frame.
3. Grasp the seat handle at the rear of the seat bottom and depress the seat latch to unlock the seat frame.
4. Pulling seat rearward, swing the inner seat legs away from the latch, while lifting the seat by the seat handle. This will
move the lower portion of the inner seat legs to the rear and out of the front seat leg sockets.
5. Swing the inner seat leg forward and gently lower the seat to the frame, fold down the seat back and arms. The seat
will nest neatly on the frame.
6. Remove front basket (if required) by pulling upright on the basket.