Operation Manual

Fold & Go Model 370 Owner’s Manual
EMC Part: 19269600 • Rev. 03 • 04/11/05
11
4. Attach the separate AC line cord into the Charger.
Connect other end to electrical outlet. (Note: The LED
will turn flashing red to show that the charger has
passed the power on test and is ready for connection
to the battery.)
5. Plug the round, 3-prong plug attached to the Charger
into connection on Battery.
6. An LED Indicator on the charger housing should appear
red while charging. When LED appears green, Battery is
fully charged.
7. If Battery was removed from vehicle, replace it into
frame and make sure latch secures it in place.
Figure 5 — Battery Pack Charging Connection