Operation Manual

Fold & Go Model 370 Owner’s Manual
EMC Part: 19269600 • Rev. 03 • 04/11/05
8
Seat Installation
The seat is mounted on a folding, tubular frame that
attaches directly to the chassis of the vehicle. A Quick-
Release latch at the bottom rear of the vehicle frame
secures the frame in place. To install the seat:
• Tip the seat frame forward and slide the front legs of
the seat into the seat leg sockets
•Lower the rear end of the seat frame into the rear
locations in the chassis
• Make sure the Seat Latch snaps into locked position
Seat installation is shown in Figure 2.
Figure 2 — Installing the Seat