Operation Manual

Fold & Go Model 760 PowerChair Owner’s Manual

EMC Part: 19272200 • Rev. 01 • 01/05/04

4. Release the latch at the top of the Battery Pack so that

the pack pivots backward, disconnecting the terminals.

Battery cannot be charged while connected. Plug the

round, 3-prong plug attached to the Charger into

connection on Battery.

5. Attach the separate AC line cord into the Charger.

Connect other end to electrical outlet. An LED

Indicator on the charger housing should appear red

while charging. When LED appears green, Battery is

fully charged.

6. When fully charged, disconnect Charger from Battery

Pack and move Pack forward until it latches in position.

Figure 5 — Battery Pack Charging Connection