Datasheet

Power:
5 VDC via USB connector
500 mA max
250 mA typical
Data connection: USB 2.0 via micro USB type-B connector
Tracking range and
field of view:
Depth of between 10 cm (4”) to 75 cm (29.5”) preferred, up to 1 m (39”) maximum;
170°×170° typical field of view (160°×160° minimum).
Ultraleap 3Di can provide touchscreen emulation for screens up to 42” (portrait or
landscape). Larger screens can also be controlled through interaction at a distance.
Camera framerate: 90 fps
Operating
wavelength:
850 nm. Provides its own illumination via two IR LEDs spaced on either side of
the cameras.
Temperature rating: 0°C to 40°C (32°F to 104°F)
Ingress protection: IP54 when mounted using Panel Mount Kit (available from Ultraleap)
Certification: UKCA, CE, FCC
Minimum system
requirements:
Windows® 10, 64-bit, Intel® Core™ i3 processor 5th Gen (must support AVX
instructions), 2 GB RAM, USB 2.0 port. Note: Ultraleap 3Di is currently Windows
compatible only.
Software:
Downloadable from https://www.developer.ultraleap.com/touchfree
Specifications
Ultraleap reserves the right to update or modify this specification without notice.
Device dimensions
All dimensions in mm
w/ https://www.ultraleap.com
e/ [e-mail]
o/ UK: [phone]
o/ US: [phone]
UL-005595-DS - Ultraleap 3Di Datasheet (Issue 3)
Mounting
Ultraleap 3Di is designed to be integrated directly into permanent
installations. A Panel Mount Kit (available from Ultraleap) enables
the camera to be securely mounted in a cutout of panels of
thickness 2–8 mm.
Detailed guidelines on camera placement, further mounting
options, TouchFree software setup and designing for touchless
experiences can be found on https://docs.ultraleap.com/
touchfree-user-manual/.
Example 2 mm panel installation using Panel Mount Kit