User Manual

To turn the lamp on:
1. Connect the AC adapter input into the connector in the rear-bottom of
the lamp. Plug the AC adapter into a standard household 120V AC outlet.
Note: Use only with the supplied AC adapter to avoid damage or fire.
2. Touch On/Off to turn on the lamp.
3. Touch or slide finger up and
down on control panel to
adjust brightness. There are
six levels of brightness
4. Tap to switch between 3 light temperature modes: Warm, Natural,
Bright light.
5. Tap On/Off to turn off.
USB Port Specifications:
* Output: 5 Volt, 2.1A (both ports).
The USB Ports are capable of charging most phones, iPads and small tablets.
Requires USB cable to charge (not included).