Product Manual

Page 9 of 14
Un-Hitching
1. Unlock the coupler by removing the Safety Clip. Top hole Secondary Lock
2. Flip the Secondary Lock forward until it is pointing up.
Hold it while raising the jack.
3. If both hands are needed, the Secondary Lock can be
held by inserting the Safety Clip into the top hole while
raising the jack.
4. Jack up the trailer hitch until it clears the hitch ball and pull out the Safety Clip. The unit is now
back to the unlocked position, as shown in the first illustration.er
After Each Use
WARNING
Inspect the coupler for proper operation.
Inspect, in particular, the coupling area. Replace when the wear exceeds 1/8" (.125") from the
original surface profile.
Inspect for worn, damaged, and missing parts. Replace as required.
Maintenance
WARNING
Inspect for proper operation.
Inspect, in particular, the coupling area. Replace when the wear exceeds 1/8" (.125") from the
original surface profile.
Inspect for worn, damaged, and missing parts. Replace as required.