Product Manual

Page of 6

ASSEMBLY

STEP 1: (SEE PHOTO #1)

Attach the Mounting Bars (part #1) to the Mounting Bracket (part #2). Set the Mounting Bars (part #1)

(containing 6 holes) flat against the trailer tongue so that the edges of the Mounting Bars (part #1) curve

out away from the trailer tongue. Insert 4 hex bolts (part #3) through the Mounting Bars (part #1) as close

to the trailer tongue as possible. Slide on Lock washers (part #8) and thread on Nuts (part #6). SEE

PHOTO BELOW

STEP 2:

Mount the tire on the Tire Mounting Bracket with the valve facing outward so that the tire air pressure

can be checked at any time.

Note: Make certain the tire is centered on the Tire Carrier when mounted, and refer to 5-lug or 4-lug

mounting hole in Figure 2 below.

NEXT, insert carriage bolts (part #4) through back of the Tire Mounting Plate and through the Wheel lug

holes. Secure using mounting nuts (part# 5)

Trailer Tongue (or

frame)

Mounting Bars to back

of trailer tongue

(part #1)

Mounting bracket (part

#2)

PHOTO #1

FIGURE #2

Unbalanced over Carrier

Balanced over Carrier