Product Manual

Page of 4
3
 Do not modify the jack in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the equipment. There are specific applications for which the
jack was designed.
 The swivel is very strong. However abuse, corrosion or damage may cause swivel to break.
Regularly inspect the swivel for damage and discontinue use if the swivel is damaged.
 Store idle jack. When jack is not in use, store it in a secure place out of the reach of children.
Inspect it for good working condition prior to storage and before re-use.
SAVE THESE INSTRUCTIONS
ASSEMBLY
1. When mounting trailer jack it is best to hook up to the tow
vehicle to make sure trailer is secure.
2. Mount jack based on drawing shown. All welding must be
performed by a certified welder.
3. Place jack in the proper location for trailer application..
4. Weld on entire length, width and height of bracket with 3/16"
fillet weld.
5. After jack is mounted to trailer, attach handle assembly to jack
with bolt fastener provided.
OPERATION
1. To activate the swivel function on this jack pull the pull pin and swivel jack into desired position.
2. Only swivel jack when trailer is securely attached to a tow vehicle.
3. Make sure pull pin is properly engaged after swiveling into desired position.
MAINTENANCE
• Maintain your Jack. It is recommended that the general condition of any jack be examined
before it is used. Keep your jack in good repair by adopting a program of conscientious repair
and maintenance. If jack is damaged, discontinue use of the jack.
• This jack is pre-greased for easy operation. This jack however includes a grease zerk for easy
lubrication as needed.