Product Manual

Page 7 of 14
 Select a winch line with breaking strength at least 1-1/2 times the winch rating and a hook 1-1/2
times stronger than the line.
 CABLE REPLACEMENT: Use extreme care when replacing cable, it is secured under tension by
the cable clamp, and may spring back forcefully.
 Put the pawl in reel out position. Reel the old cable all the way out by turning the handle
counterclockwise.
 Loosen the nut and remove the old cable from underneath the cable clamp.
 Remove the old cable.
 Route the new cable end over the bushing and through the hole to the outside of the drum.
 Install the cable under the cable clamp.
- Tighten the nut securely.
- Place the pawl in reel in position and reel the new cable onto drum by turning the handle
clockwise, being careful not to allow kinking.
- Test winch for proper operation.