Product Manual

Page 10 of 14
Maintenance Interval Maintenance Point
Daily before operating
Periodically inspect all parts, steel cable, accessories and
replace them if damaged. Have damaged parts replaced by an
authorized service center. Check the nuts periodically and
tighten if loose.
After the first 20 operating hours
Follow the instructions for lubricating periodically
Lubricate the cable and hook regularly with slight grease.
Grease the gears every 6 months. Use any good quality
waterproof grease.
Troubleshooting
⚠WARNING
Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected
before further use.
Use the table below to troubleshoot problems before contacting service personnel or your local dealer.
If the problem continues after troubleshooting, call your local dealer for assistance.
Failure Possible Cause Corrective Action
Cannot crank or crank is
difficult to use
Overloaded Change to a heavier winch
Gear deviation
Overused
Change winch Gear worn
Out of durable years
Ratchet doesnot work Ratchet worn Change winch
Cable worn Overused Change cable
Strap worn Overused Change strap