Product Manual

Page 8 of 14
 If nylon strap is used, it should have a loop sewn in one end and be attached using a 3 /8" x 3" or
1 /4" x 2-3/4" long bolt and locknut. Use a locknut, not a nut and lock the washer. Insert bolt
through slots in both reel side plates so that nut is on gear side.
 Tighten only until snug with bolt in bottom of slot next to reel hub.
Main Parts of Winch
Reference
Subassembly
1
Crank handle
2
Ratchet switch
3
Axis bolt
4
Base
5
Drum
Assembly Instructions
Insert handle and secure with a lock nut.