Product Manual

7
STEP 7
Connect the wires from the Axle Assembly (Part# A9) to the wires on lights, making sure to route wires so
they are free of moving parts. See Figure 7-1.
Figure 7-1
NOTE: The colors of the light wire through the Axle Assembly should match with those through
the Fenders.
STEP 8
1. Use 16 Safety Pin (Part# A11) and Spring Pin (Part# A16) to connect the Front Channel (Part# A2) and
Tow Bar (Part# A1). See Figure 8-1.
Figure 8-1
2. Use L-Pin (Part# A12) and R-Pin (Part# A18) to connect the Front Channel (Part# A2) and Rear
Channel (Part# A3). See Figure 8-2.