Product Manual

Page 10 of 14
2. To pull out all of the cable, unlock the winch.
After Each Use
⚠WARNING
Keep the crane away from children.
 Before driving the vehicle, retract the winch cable completely, position the boom over the truck’s
wheel well, and insert the post pin to prevent the boom from swiveling.
Maintenance
 It is recommended that the general condition of any tool be examined before it is used. Keep your
crane in good repair by adopting a program of conscientious repair and maintenance in
accordance with the recommended procedures found in this manual. If any abnormal vibrations or
noise occurs, stop using the crane immediately and have the problem corrected before further
use. Have necessary repairs made by qualified service personnel.
 Use only soap and a damp cloth to clean your tools. Many household cleaners are harmful to
plastics and other insulation. Never allow liquid to get inside of a tool.
 When servicing, use only identical replacement parts. Use of any other parts will void the
warranty. Only use accessories intended for use with this crane.
 To add oil, fully collapse the jack and add oil to move the oil level to the oil plug. Use only
hydraulic jack oil.
 Lubricate the grease fitting with a grease gun once a month, or when the boom becomes difficult
to switch on the post.
 If the crane will be exposed to wet conditions, more frequent lubrication may be necessary to
prevent build-up of rust.
Maintenance Interval
Maintenance Point
Daily before operating:
Check the fuel level.
Check the hardware.
Check for broken parts.
Every month or if the boom
becomes difficult to swivel on the
post:
Lubricate the grease fitting with a grease gun.
After a year of operation:
Change the lubrication oil.