Product Manual

Page 8 of 13
Step 3. Insert the desired motorcycle swingarm L support (4) and adjust width to the motorcycle
swingarms.
Step 4. Tighten the plastic headed bolt (5) on each side to hold the swingarm L support (4) in place.
Before Each Use
⚠WARNING
 Ensure that there is nothing attached to the front forks or the fairing of the motorcycle that will
catch on the chock.
 Also ensure that the floor/ground is level and strong enough (preferably concrete) to take the
weight of the chock and the motorcycle.
 Ensure the respective adapters are used for the proper application for maximum stability during
lifting.
Operating Instructions
⚠WARNING
 DO NOT mount the chock on tarmacadam, as the surface may be unstable.
 The stand needs to be used in conjunction with a suitable rear wheel lift stand to ensure full
stability.
 Use two people to operate the lift.