Product Manual

Page 5 of 7
OPERATION
1. To turn on the lightbar, insert the 12V plug into the vehicles power outlet.
Press the on/off button on the back on the 12V plug. When the lightbar is operating, the
LED on the plugs switch will illuminate.
2. To turn off the lightbar, remove the 12V plug from the vehicles power socket or position
the on/off switch to off.
3. The 12V plug has a built-in fuse to protect the lightbar and the vehicle. If the lightbar does
not turn on when the plug is inserted into the vehicle power socket, check the fuse built
into the power plug by the following method: The tip of the power plug has a chrome
push-in contact which is secured by a black nut. Unscrew the nut which will give you
access to the fuse. If the fuse needs to be replaced, use a 10 Amp fuse. Follow the
reverse procedure to re-assemble fuse back into power-plug. (See Figure 3)
MAINTENANCE
It is recommended that the general condition of the lightbar be examined before it is
used. Keep your lightbar in good repair by adopting a program of conscientious repair
and maintenance. Have necessary repairs made by qualified service personnel.
Clean the surface of lightbar lens frequently to keep its brightness.
When any malfunction occurs, stop using and repair it immediately as soon as
possible. Please operate your lightbar according to the proper operation procedures.
Figure1
Mounting Surface