48 WATT LED AMBER LIGHTBAR OWNER’S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.
Thank you very much for choosing an Ultra-Tow product! For future reference, please complete the owner’s record below: Model: _______________ Purchase Date: _______________ Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product before you begin using it. This lightbar is designed for certain applications only. The distributor cannot be responsible for issues arising from modification.
WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions or situations that could occur. It must be understood by the operator that common sense and caution are factors that cannot be built into this product, but must be supplied by the operator.
• Always check damaged or worn out parts before using the lightbar. Broken parts will affect the lightbar operation. Replace or repair damaged or worn parts immediately. INSTALL THE LIGHTBAR Magnetic mounting 1. The magnetic lightbar should be positioned on the vehicle’s roof where the magnets will safely secure the lightbar. Before mount the lightbar to the roof, be sure the surface is clean and clear of dirt, grease and debris. 2. Locate the desired location where you wish to mount the lightbar.
OPERATION 1. To turn on the lightbar, insert the 12V plug into the vehicle’s power outlet. Press the on/off button on the back on the 12V plug. When the lightbar is operating, the LED on the plug’s switch will illuminate. 2. To turn off the lightbar, remove the 12V plug from the vehicle’s power socket or position the on/off switch to off. 3. The 12V plug has a built-in fuse to protect the lightbar and the vehicle.
PARTS DIAGRAM & PARTS LIST Part# Description Qty. 1 PC lens 1 2 LED beacon 2 3 15ft. spring cord 1 4 12V plug 1 5 Magnetic base (not shown) 4 6 M6 x 10 screw (not shown) 2 7 Flat washer(not shown) 2 8 Spring washer(not shown) 2 9 M6x35 Hex bolt(not shown) 2 For replacement parts and technical questions please call 1-800-222-5381.
WARRANTY 1-year limited warranty Distributed by: Northern Tool + Equipment Co., Inc. Burnsville, Minnesota 55306 NorthernTool.
