Product Manual

Page 11 of 15
Step 7 - Refer to Fig. 7
Attach all Front Feet and Rear Feet (13 and14) to corresponding legs (4, 5, 7, 8). Make sure the foot
lips face inside the truck bed. Attach with Bolt Sets G.
Position the Feet (13 and 14) so that the lips are flush with the insides of the rails.
Insert J-Hooks (11) up through the mounting tubes on each Foot, and secure with Bolt Set H from the
top. Tighten the hardware until the J-Hooks (24) are holding the Feet tightly against the bed rail.
Square and level all components, then tighten all hardware securely.
Step 8 – Square and level all components, then tighten all hardware securely.