Product Manual

Page 10 of 14
Step 5 - Refer to Fig. 6
Insert a Plastic End Cover (7) into each end of each of the three Cross Bars (4).
Position Post A (1) and Post B (2) on the truck bed rails and secure them by inserting J-hooks (5) up
through the mounting holes on the feet of the Posts (1 and 2) and securing the J-hooks (5) with Bolt
Set E; tighten Bolt Set E to ensure that J-Hooks (5) are holding the foot tightly against the bed rails.
Put the Cross Bars (4) with the four extra bolts onto Posts (1and 2), placing the bolts through the
holes in Posts (1and 2), and secure with Bolt Set D.
Attach the Supporting Frames (3) to the three Cross Bars (4) with M10*20 Square-head Bolts through
Rubber V Pad Assembly (8 and 9) and secure with Bolt Set B.
Step 6
Square and level all components, then tighten all hardware securely.