Product Manual

Page 3 of 6
WORK AREA
· Keep work area clean, free of clutter and well lit. Cluttered and dark work areas can cause accidents.
· Keep children and bystanders away while using the ramp. Distractions can cause you to lose control,
so visitors should remain at a safe distance from the work area.
· Be aware of all power lines, electrical circuits, water pipes and other mechanical hazards in your work
area, particularly those hazards below the work surface hidden from the operator’s view that may be
unintentionally contacted and may cause personal harm or property damage.
· Be alert of your surroundings. Using a trailer jack in confined work areas may put you dangerously
close to cutting tools and rotating parts.
PERSONAL SAFETY
• Use personal protective equipment. Always wear eye protection. Safety equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce
personal injuries.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the ramp
in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
USE AND CARE
· Use the right ramp for the job. Do not attempt to force a small ramp to do the work of a larger industrial
ramp. There are certain applications for which this ramp was designed. Do not modify this ramp and
do not use this product for a purpose for which it was not intended.
· Stay alert. Watch what you are doing, use common sense. Do not set up and use the ramp when you
are tired.
· Check for damaged parts. Before using any tool, any part that appears damaged should be carefully
checked to determine that it will operate properly and perform its intended function. Check for
alignment and binding of moving parts; any broken parts or mounting fixtures; and any other condition
that may affect proper operation.
THIS TRI-FOLD RAMP SET IS FOR USE WITH 2- OR 4-WHEELED ATVs AND BIKES ONLY! DO NOT
USE THIS RAMP TO LOAD 3-WHEELED VEHICLES!
TO USE
Make sure the vehicle to be loaded is off, in park, the emergency brake is engaged, and the wheels
are blocked.
Open ramps completely and secure using the securing straps and hook (included)
Set up ramp
1. Make sure ramps and tailgate are dry and clean.
2. Set the tongue (angled lip) of the ramp on the tailgate. Stretch the safety straps on each ramp being used
into the bed of the vehicle and attach hook to a safe/secure attachment point. The straps should be tight.
SAFETY Straps MUST HAVE A SECURE ATTACHMENT POINT IN THE TRUCK BED TO WITHSTAND
THE FORCE OF LOADING.
3. Pull the ramp back until straps are tight. If the tongue portion of the ramp does not fit onto the tailgate,
shorter safety strap may be needed.
ONLY USE A WINCH (NOT PROVIDED) TO LOAD THE 4-WHEEL ATV.