Product Manual

Page 6 of 9

Reference

Subassembly

Aluminum Ramp

10 Pin

U-Type Plate

3.8 Clip

Strap with S Hook

Assembly Instructions

1. Align the two pieces of the ramp and attach them by using the U-type plate (ramp with clip toward

the outside). See the figure below.

2. Be sure you are loading on a hard, level, and stable surface and that the vehicle you are loading

into is parked with the emergency/parking brake in “park” and the engine is off. Unfold and place

the lips of the ramps against the back of the vehicle. Secure the ramps to the vehicle using the

safety straps.

Maintenance

 Maintain the ramps with care. Inspect them periodically, and if damaged, have them repaired by

an authorized technician.

 For your safety, maintenance should be performed regularly by a qualified technician.

 Clean the ramps after each use. Make sure any dirt, oil, grease, or debris is not present on the

ramps.