Product Manual

Page 8 of 12
b. Connect the wire with the red connector (#7) to the 1.5m cable.
c. Connect the red wire (#8) to the reversing light power positive. Use the black wire (#9) for
grounding. Wires #8 and #9 are on the other end of the 1.5m cable (opposite of #7).
Figure 2
Figure 3 shows the entire wire connection.
Figure 3
BACK-UP CAMERA INSTALLATION
1. The camera is designed to be mounted with the fasteners of most license plate holders. If you
choose not to use that mounting method, locate a good place to mount the camera. Make sure