Product Manual

Page 7 of 12
Assembly Instructions
⚠WARNING
 The monitor contains high voltage. The cover should be opened by qualified technicians only.
1. Connect the monitor wires (Figure 1).
a. Connect one side of the 20m cable with the yellow connector (#1) or white connector (#2) on the
monitor wire.
b. Connect the red connector (#3) to the 1.5m power cable.
c. Connect the red wire (#4) to the reversing light power positive. Use the black wire (#5) for
grounding. Wires #4 and #5 are on the other end of the 1.5m cable (opposite of #3).
Figure 1
2. Connect backup camera wires (Figure 2).
a. Connect the wire with yellow connector (#6) to the other side of the 20m cable.