Product Manual
Page 6 of 12
before using.
Disconnect the power/air supply from the product and place the switch in the locked or off position
before making any adjustments, changing accessories, or storing the tool. Such preventive safety
measures reduce the risk of starting the tool accidentally.
Store the camera when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your product.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Specific Operation Warnings
⚠WARNING
Never use the camera near a bathtub, wash basin, kitchen, damp basement, swimming pool, or
similar area.
The monitor is not water-proof. Do not submerge the monitor or expose it to rain.
Never use this camera in environments with excessive moisture, dust, or smoke.
Avoid dropping or striking this camera.
Avoid using the camera in enclosed spaces, areas with excessive vibration, or subject to severe
impacts.
Never puncture, scratch, or use abrasive cleaning materials on the camera.
Do not place cables where they may be pinched or stepped on.
Leave at least a 2" space between the monitor and walls, cabinets, or other objects to allow
adequate air circulation around the unit.
Grounding
⚠WARNING
This machine must be grounded while in use to protect the operator from electrical shock. This
unit is equipped with an electrical cord that has an equipment grounding conductor and a
grounding plug. The plug MUST be plugged into a matching receptacle that is properly installed
and grounded in accordance with ALL local codes and ordinances.
DO NOT MODIFY THE PROVIDED PLUG. If it will not fit the receptacle, have the proper
receptacle installed by a qualified electrician.
CHECK with a qualified electrician or service person if you do not completely understand the
grounding instructions, or if you are not sure the tool is properly grounded.