Product Manual

Page 10 of 12
After Each Use
⚠WARNING
 To avoid property damage, do not expose the monitor to excessive heat or cold. The storage
temperature of the camera is -30 to +70°C and the operating temperature is -20 to +50°C. The
humidity is Rh90%.
Maintenance
⚠WARNING
 Remove all the cable connections from the monitor before cleaning the unit.
 Use a mild household detergent and clean the unit with a slightly damp, soft cloth. Never use
strong solvents such as thinner or benzene, as they might damage the surface of the device.
Troubleshooting
Use the table below to troubleshoot problems before contacting service personnel or your local
dealer. If the problem continues after troubleshooting, call your local dealer for assistance.
Failure
Possible Cause
Corrective Action
Monitor does not
work but the light is
on.
The screen displays the backlight mode.
Replace the monitor.
The monitor’s PCB is broken.
Replace the monitor.
Monitor has a blue
screen but the light
is on.
The wire from the monitor to the camera is
not securely connected.
Check the connection from the monitor to
the camera. Make sure it is secure.
The back-up camera is damaged.
Replace the camera.
Monitor does not
work and the light
is off.
The ON/OFF button has not been pressed.
Press the ON/OFF button to turn on the
monitor.
The working voltage for the monitor doesn’t
match 9V-12V DC.
Change the power to 9V-12V DC and turn
on the monitor.
Replacement Parts
 For replacement parts and technical questions, please call Customer Service at 1-800-222-5381.
 Not all product components are available for replacement. The illustrations provided are a
convenient reference to the location and position of parts in the assembly sequence.
 When ordering parts, the following information will be required: item description, item model
number, item serial number/item lot date code, and the replacement part reference number.
 The distributor reserves the rights to make design changes and improvements to product lines
and manuals without notice.