Product Manual

Page 7 of 15
cable before installation.
• When using the drop foot or drop leg, make certain the supplied pin is fully inserted through both
sides of the inner tube and the drop tube before using the jack.
• If the trailer jack has a drop leg, never attempt to adjust the drop leg when there is any load on the
jack.
Main Parts of Trailer Jack
Reference
Subassembly
1
Hand Crank Handle
2
Light Switch
3
Extend / Retract Motor Switch
4
Connector Storage Bracket
5
(3) Graded 5, 1 in. long, 3/8in.-16 UNC Bolts
6
(3) 3/8in. Flat Washers
7
(3) Lock Washers
8
7-Way Connector
9
Drop Leg