Product Manual

Page 4 of 15
Intended Use
The Ultra-Tow 5000-Lb. Capacity Electric Trailer Jack has a ball and screw design. The brake motor
increases the lift efficiency and reduces friction. The motor works less, draws less amperage, creates
less heat, and produces less noise. This greatly increases the motor and jack life. The brake motor
ensures free stops at any time, preventing damage caused by hard stops and excessive pressure.
The 7-way connector plugs into your vehicle allowing you to lift or lower the jack with the push of a
button (no hard wiring). The jack has a one-piece, water-proof, industrial design cover. Improved
LEDs illuminate the area in front of the jack for superior nighttime visibility. The plastic connector
storage bracket holds your 7-way connector firmly in place to protect from weather, dirt, and damage.
Packaging Contents
Technical Specifications
Specification
12V DC A-Frame
5,000
7,500
22
18
9 (Measured from ground to center of mounting point)
31-1/2 (Measured from ground to center of mounting point)
4-1/2
2-1/4
Includes manual crank handle
Foot pad
A-frame mounting plate
Steel
Fits 2 1/4in. mounting holes
9
Important Safety Information
WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
Tools and Components Required
A-Frame Coupler with Lower Support Plate (owner supplied, not included)
Three Grade 5, 1in. Long, 3/8in.-16 UNC Bolts
Three 3/8in. Flat Washers
Three Lock Washers
9/16in. Wrench (owner supplied, not included)
Torque Wrench (owner supplied, not included)
Wire Cutters (owner supplied, not included)
Wire Strippers (owner supplied, not included)
Crimpers or Soldering Iron (owner supplied, not included)