Product Manual

Page 9 of 17
5. Install the long J-hook assembly (#15) and short J-hook assembly (#16) onto the vertical arm.
Tighten the eyebolt (#21). Secure the J-hooks by using a snap pin (#20). Place the reflector (#22)
in the hole of the square tube. See Figure 5.
Figure 5
6. Insert the folding shank into the 2” receiver, using a stabilizing pin, 1/2" flat washer, 1/2" spring
washer, and a clip (#17, #18, #19, and #11).
Figure 6