Product Manual

Page 7 of 17
1. Assemble the carrier frame by connecting the support base assembly (#1) and horizontal arm
(#2) using an M10 carriage bolt (#4), L pin (#3), M10 flat washer (#5), and an M10 lock nut
(#6). Turn the L pin (#3) 90 degrees to lock the horizontal arm (#2). See Figure 1.
Figure 1
2. Place the vertical arm (#7) into the U bracket of the support base assembly, using an M10
carriage bolt (#4), L pin (#3), M10 flat washer (#5), and an M10 lock nut (#6). With the vertical arm
(#7) in the vertical position, insert the L pin (#3). Turn the L pin 90 degrees to lock the vertical arm.
See Figure 2.
Figure 2