Product Manual

Page 5 of 6
abnormal vibrations or noise occurs, have the problem corrected before further use. Have necessary
repairs made by qualified service personnel.
Tools Need ,
ASSEMBLY
Step 1 Unfold the tri-fold ramp, assemble the tongue (2) under the ramp plate (1) with M8x16 hex bolt (3),
flat washer (6), spring washer (5) and nut (4), then tighten. .
Step 2 Place the tongue of tri-fold ramp against the back of vehicle.
Step 3 Secure the ramp to the vehicle using the safety chain. After the safety chain is secure, test the ramp
by pulling backwards on it. Make sure it does not slide back or disengage from the loading surface.
Step 4
Unhook the safety chain and fold the ramp when not in use, portable design is convenient to carry.
Oepn Wrench（1pc）
Size=13mm
Monkey Wrench（1pc）
Size=0-300mm