Product Manual

Page of 8
2
Thank you very much for choosing a Ultra-Tow Product! For future reference, please complete
the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire
manual to become familiar with this product before you begin using it.
This tow bar is designed for certain applications only. The distributor cannot be
responsible for issues arising from modification. We strongly recommend this tow bar is
not modified and/or used for any application other than that for which it was designed. If
you have any questions relative to a particular application, DO NOT use the tow bar until
you have first contacted distributor to determine if it can or should be performed on the
product.
For technical questions, please call 1-800-222-5381.
TECHNICAL SPECIFICATIONS
Description
Specifications
Maximum Towing Capacity
5,000 lbs.
Coupler Ball Capacity
2”
Mounting Width Capacity
26” to 41”
GENERAL SAFETY REGULATIONS
WARNING: Read and understand all instructions. Failure to follow all
instructions listed below may result in serious bodily injury or death, and/or property
damage.
WARNING: The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions or situations that could
occur. It must be understood by the operator that common sense and caution are
factors that cannot be built into this product, but must be supplied by the operator.
INSTALLATION NOTES
1 This tow bar is to be installed by a professional installer / fabricator experienced in
selecting vehicle attachment areas with adequate strength.
2 Park vehicles on level ground for installation.
3 The coupler must be level within 5º when attachment is complete as shown:
4 Bumper attachments should be reinforced as shown below.
5 Attachments to the towed vehicle should be bolted not welded.